The Jaga Forum is the perfect place to find the answers you need. From specific Jaga product queries to general heating and ventilation problems, we can help. The Forum is also a great way to discuss wider industry topics with other heating professionals.
How to get started
To post a question, simply click here and then select ‘Register’ to open your free Forum account. Registration only takes a few moments, but will give you the chance to put your questions to our team of heating and ventilation experts. Once your details have been submitted, you will receive an email confirming your forum membership. Follow the instructions in the email and you will then be able to post messages and questions on the Jaga Forum.
Please note that this forum is moderated, so messages may not appear immediately.
I see you use EN442 when referring to outputs in watts, what is this?
How does the M24 sleeve coupling fit on the pipework, rubber sleeve to the valve or the copper split olive
I recently had a jaga strada radiator fitted by my plumber, and would subsequently like to fit with clip on towel rail option (5501.002) as outlined in jaga strada brochure. (I'm assuming it can be simply clipped on later and its not welded to the radiator upon initial order with...
Am i correct in thinking trench heating is only usally used next to a full glazed panel or a door of some sort?
I was thinking of replacing all the radiators in a living room with trench heating - to free up the walls. The walls are full brick or...
All Saints Primary School safety check
I'm currently renovating a double barn in France. I'm considering using an air source heat pump (though not decided which one) & radiators to heat two 7m x 7m rooms downstairs & the equivalent area upstairs. One of the upstairs areas will be a mezzanine. As I would like to...
is there any option to control clima canal FC activator via analog output?
Hello i have a Jaga Iguana Circo Corner Radiator and i am missing one of the tiny air bleed screws from the top. Please can you advise me where i can get a replacement. Thank you in advance for your help ..martin .
HI guys, got ENERGY SAVERS line in STRADA model. Need to run pipes up to the ceiling. Second is the heating element held in metal sides just by ``click in`` system? it seems to be too slack considering weight filled with water?? thanx George
I am looking for a white Jaga TRV head code 5090.1104. Can you tell me where I can buy one, price etc?
Is the Play radiator still only 1200mm maximum length? I could use 130mm deep x 350mm high x 1800mm long.
As per the title.
Need to decorate and need to remove radiator from the wall but need to
Disconnect thermostat valve first? How?
My Iguana radiator was fitted by a plumber but the filling sequence was not used I now have a cool side/area, i have vented it many times. is it advisable to drain down and refill properly?
Can I purchase new Circo brackets from Jaga?
Please could you tell me where I can locate your trade price list. Thank you
What is the best way of controlling room temperature when using a Jaga trench heating system in just one room of a house. The central heating ring main flow in the whole house is controlled by a thermostat in a different room.
do you supply replacement control knobs for jaga cocoon radiators
How do I replace the thermostatic head on my Geo horizontal radiator? The connection looks difficult to access.
How do I replace the thermostatic head on my Geo horizontal radiator?
Where can I buy a Jaga play and a Geo either online or in East Anglia?
Hi, what kind of cable do I need to use the Jaga DBE Communcations Software you have provided here: http://www.jaga.be/drivers/JAGA_DBE_CUSTOMERS.zip
I have purchased 2 x Iguana arco radiators but have the wrong TRV sets - angled and apparently I need straight. The fitter is unable to fit the rads so would like to know where I can get the correct sets.
Please can you send me correction factors for the mini freestanding radiator, they are not included within the catalogue like your other ranges
I have a Jaga Aplano radiator and need to know the water volume. Can you tell me please? The rad is 300mm wide (11 fins) amd 1.8m high. Many thanks
Dear Jaga, I work for a housing Association and Jaga radiators were fitted to one of our 60 flat Extra Care schemes, along with jaga TRV's, some of these TRV's are now proving faulty, were can we source new Jaga TRV's locally?? Many thanks Colin Lee, Senior Clerk of...
Hi, could you please confirm if Jaga make a 4-pipe trench heating/cooling product? If so, what are the dimensions of this unit? In particular, what is the minimum depth which could be achieved? Many thanks.
I once had a long Dimplex oil filled heater that was very good. I now need to renew it but I don't think it is now available. I have found a Creda but would like to know if there are any others available. Fingers crossed
I am wanting a wall mounted oil heater no more than about 40cm in hight and 2 to 3 metrews long. Dimplex used to do one but it seems no longer. It is to fit under a long picture window.
We have recently installed a condensing boiler. The radiators that we have are jaga strada with thermostatic valves. Our problem is that three of the radiators, all on one loop, are not heating fully. The inflow pipe is extremely hot but the outflow pipe is barely warm, We have bled...
my email address is email@example.com
thx in advance
Hi there, can we buy jaga iguana radiators directly from you? If so could you tell me prices and lead times for delivery?