The Jaga Forum is the perfect place to find the answers you need. From specific Jaga product queries to general heating and ventilation problems, we can help. The Forum is also a great way to discuss wider industry topics with other heating professionals.
How to get started
To post a question, simply click here and then select ‘Register’ to open your free Forum account. Registration only takes a few moments, but will give you the chance to put your questions to our team of heating and ventilation experts. Once your details have been submitted, you will receive an email confirming your forum membership. Follow the instructions in the email and you will then be able to post messages and questions on the Jaga Forum.
Please note that this forum is moderated, so messages may not appear immediately.
Do you do a vertical version of the Strada? I am restricted to 500mm length and 150mm depth but cannot get the output from a 650mm high radiator which is the tallest available with these restrictions. I have up to 1600mm total for height.
I have used the Strada range throughout...
I need replacement TRV head they are white with jaga motif on the side
could anyone tell me where i can buy the Geo Horizontal rad in the UK?
Hi, can the iguana chrome straight trv set ( b&q 5050753013364) be fitted onto 8mm and 10mm microbore pipework? does the set come with any reducers?? thanks
When using Micro Canal vertically do you have a cheaper grill than the heavy duty (stand on) version used for horizontal positioning?
i need to remove the radiator to decorate , i have closed the valve, when i undo the bleed nipple water spurts out as though under pressure do i need to drain the system .cheers paul.
Specifically to knockonwood and strada rads at a later date? If so which models and what is cost per unit? Type 6,10,15 ?
Looking to fit a cico rad. Does anyone know the distance between inlet/outlet to boiler on dual valve. I am working to tight tolerances around joists and existing pipework.Be a shame to fit ordinary ones .
Which of the following merchants supply your radiators - BSS/PTS, Wolseley, Harris & Bailey?
Hi I have been asked to price up a job consisting of an ATWHP and 7 rads in a domestic bungalow. I have been advised buy the heat pump rep that i need to oversize my rads by 50%. My first question is , is this...
Wondering who competes with you in the radiator segment
Is it possible to use both eater and electric element at the same time in GEO Vertical? If yes, whats the total output? (central heating apartment, not possible increase boiler settings)
Hi Is it possible to increase heat output of GEO VERTICAL 180x60 mm
- whats the total heat output combined of water+electric?
Do Strada DBE radiators push the airlut through the top or bottom?
I purchased a Jaga Iguana Thermostatic Radiator-Valve Connection Set from B&Q but when the radiator was removed for decorating the nuts and olives were damaged - is it possible to get replacements and if so where from as British Gas have told me that they are not standard fittings. ...
Would you normally use a room thermostat with a series of Strada DBE rads?
Also - is there a showroom in England where you can view the radiators working?
The architect would like the grille to match floor grilles in an adjacent room (which are used for a fan coil unit).
Hi, I have a low temp heating system installed (ASHP + low temp rads) and would like to install a few of your radiators. One would be for a bathroom (3X3m) and the other for a large lounge area. The ASHP can only deliver water at 47degrees C but has...
This is the body, should be self approved
Is there a slopeing radiator available for a loft?
where can i source replacement jaga trv or a part no to source thru my suppliers
I need to disconnect a jaga strada radiator for decorating. How can I disconnect without draining the system?
It is a two pipe connection to the floor with a deco thermostatic head
As above? I am looking to buy a Jaga Briza, where would I order it?
the box we have at the moment has the following details on :- Thermostatkop Jaga Asdering Code No. EN215. 50900.1104 901.801.003. I am struggling to source these.
I see you use EN442 when referring to outputs in watts, what is this?
How does the M24 sleeve coupling fit on the pipework, rubber sleeve to the valve or the copper split olive
I recently had a jaga strada radiator fitted by my plumber, and would subsequently like to fit with clip on towel rail option (5501.002) as outlined in jaga strada brochure. (I'm assuming it can be simply clipped on later and its not welded to the radiator upon initial order with...
Am i correct in thinking trench heating is only usally used next to a full glazed panel or a door of some sort?
I was thinking of replacing all the radiators in a living room with trench heating - to free up the walls. The walls are full brick or...
All Saints Primary School safety check