01531 631 533
1 replies

Circo Corner Rad not heating properly

Posted on 15/11/2012 11:43am

Hi I have a Ciro Corner Rad and it fails to heat properly. It gets hot at the tepid at the top and cold at the bottom, do you have any advice

1 Replies
  • Justin_Jagauk
    Commented on 17/01/2012 11:01am

    Hello Nick,

    Sorry to hear you are having problems with your radiator.

    It sounds like there is still air trapped in the unit, especially as part of the radiator is getting a little warm. The most likely cause of this is small air bubbles trapped in the elbows on the back of the unit, these elbows link each vertical tube.
    Has the unit been bled / vented after being installed?

    If it has then the best action you can do over the next week is to give it three or four firm but careful smacks with your hand (protect your hand with a tea towel tor some such), this will help to dislodge any trapped bubbles and force them up to the top - after the week if you vent it again this should have cleared the problem.

    I know this sounds like a very simple way of clearing the problem but we get this call once a week or so and it always clears the issue.

    Also, are the flow and return pipes going to the radiator hot ? have they been piped up correctly?

    If you have any further enquiries please come back to us.

    Yours sincerely.

    Jaga Heating Products (UK) ltd.

Please complete the form below to ask us about any of our products or their applications and one of our consultants will be in touch with you.

Cookies & Your Privacy

We make use of cookies on this website to store small snippets of information on your computer.

This information is used to provide both a superior experience and also provide us with anonymous information about how visitors use our website.

Dismiss Find out more