The Jaga Forum is the perfect place to find the answers you need. From specific Jaga product queries to general heating and ventilation problems, we can help. The Forum is also a great way to discuss wider industry topics with other heating professionals.
How to get started
To post a question, simply click here and then select ‘Register’ to open your free Forum account. Registration only takes a few moments, but will give you the chance to put your questions to our team of heating and ventilation experts. Once your details have been submitted, you will receive an email confirming your forum membership. Follow the instructions in the email and you will then be able to post messages and questions on the Jaga Forum.
Please note that this forum is moderated, so messages may not appear immediately.
Need to decorate and need to remove radiator from the wall but need to
Disconnect thermostat valve first? How?
My Iguana radiator was fitted by a plumber but the filling sequence was not used I now have a cool side/area, i have vented it many times. is it advisable to drain down and refill properly?
Can I purchase new Circo brackets from Jaga?
Please could you tell me where I can locate your trade price list. Thank you
What is the best way of controlling room temperature when using a Jaga trench heating system in just one room of a house. The central heating ring main flow in the whole house is controlled by a thermostat in a different room.
do you supply replacement control knobs for jaga cocoon radiators
How do I replace the thermostatic head on my Geo horizontal radiator? The connection looks difficult to access.
How do I replace the thermostatic head on my Geo horizontal radiator?
Where can I buy a Jaga play and a Geo either online or in East Anglia?
Hi, what kind of cable do I need to use the Jaga DBE Communcations Software you have provided here: http://www.jaga.be/drivers/JAGA_DBE_CUSTOMERS.zip
I have purchased 2 x Iguana arco radiators but have the wrong TRV sets - angled and apparently I need straight. The fitter is unable to fit the rads so would like to know where I can get the correct sets.
Please can you send me correction factors for the mini freestanding radiator, they are not included within the catalogue like your other ranges
I have a Jaga Aplano radiator and need to know the water volume. Can you tell me please? The rad is 300mm wide (11 fins) amd 1.8m high. Many thanks
Dear Jaga, I work for a housing Association and Jaga radiators were fitted to one of our 60 flat Extra Care schemes, along with jaga TRV's, some of these TRV's are now proving faulty, were can we source new Jaga TRV's locally?? Many thanks Colin Lee, Senior Clerk of...
Hi, could you please confirm if Jaga make a 4-pipe trench heating/cooling product? If so, what are the dimensions of this unit? In particular, what is the minimum depth which could be achieved? Many thanks.
I once had a long Dimplex oil filled heater that was very good. I now need to renew it but I don't think it is now available. I have found a Creda but would like to know if there are any others available. Fingers crossed
I am wanting a wall mounted oil heater no more than about 40cm in hight and 2 to 3 metrews long. Dimplex used to do one but it seems no longer. It is to fit under a long picture window.
We have recently installed a condensing boiler. The radiators that we have are jaga strada with thermostatic valves. Our problem is that three of the radiators, all on one loop, are not heating fully. The inflow pipe is extremely hot but the outflow pipe is barely warm, We have bled...
my email address is email@example.com
thx in advance
Hi there, can we buy jaga iguana radiators directly from you? If so could you tell me prices and lead times for delivery?
My Jaga Iguana Circo is leaking here: pic.twitter.com/yxvvgykC the bleeding nut is closed fully but it appears that the water is coming from the spout (where water would usually come out of when bled), rather than any other joint.. Advice appreciated
I have got to provide a quotation for some trench heating for one of my customers who has asked me for a ballpark figure for trench heating per metre. He has a showroom (or will have when it's built) that meatures 15m x 20m with glazing on three sides....
I have a 5kW ground source heat pump. I am looking to run radiators off the pump, maybe 2 large and 2 smaller ones. I am not concerned with appearance, just neat and tidy, and white! What model would you recommend? The house is in France,...
Is the above on sale yet?. If so who is the nearest stockist to S81 8JY
the thermostat controls of the radiators are locked can you please advise on how to unlocked them so that heating can be lowered
Hi I have a Ciro Corner Rad and it fails to heat properly. It gets hot at the tepid at the top and cold at the bottom, do you have any advice
Hi.I am looking at either a Basic, Strada or linea DBE radiator. I'm looking for one that can give approx 2KW in 'comfort' mode. Can you provide a quote for the cheapest option to do this please? Thanks Paul
Wher can i purchase iguana circo straight designer radiator valves
with your low flow radiators can I just replace the radiators I have or do I need to put in a new system as we use a combi boiler
How much do these rads cost. i have no heating in house and would like to install a air heat scource pump and 6 rads
It was fitted in 1999 and worked perfectly until last September, but it then developed a leak. My local plumber thought it was due to the valve, so he replaced the TRV. No problem for a couple of months. But now the leak has come back. He now thinks the...