The Jaga Forum is the perfect place to find the answers you need. From specific Jaga product queries to general heating and ventilation problems, we can help. The Forum is also a great way to discuss wider industry topics with other heating professionals.
How to get started
To post a question, simply click here and then select ‘Register’ to open your free Forum account. Registration only takes a few moments, but will give you the chance to put your questions to our team of heating and ventilation experts. Once your details have been submitted, you will receive an email confirming your forum membership. Follow the instructions in the email and you will then be able to post messages and questions on the Jaga Forum.
Please note that this forum is moderated, so messages may not appear immediately.
I have found a leak coming from between the hexagonal shaped nut on the bleeder vent and the top surface of the radiator. After turning off both radiator valves and releasing the pressure, I tried to remove the bleeder fitting but I found it just turns without unscrewing. can the...
Regarding the height of the freestanding Tempo LST, is the given 200/300/400mm height the total height from floor to top of radiator?
The relative pdf isn't clear on that.
Additionally if not, what's the height of their leg support? A sketch, in mounting instructions, shows something like 13.5>18.5. Do we...
I've found that the little plastic pipe provided with our Strada radiators comes off the bleeding valve all to easily. This makes bleeding air from the rads almost impossible - unless you take the case off.
Is there a trick / better way of attaching the little hose pipe so it...
I have three Jaga Geo Horizontal Radiators and all three have stopped heating up. The other conventional radiators on the circuit all heat up fine and the feed pipe the Geo radiators is hot. If the system does require balancing can you advise how to do so, or if there...
We have an older, single pipe heating system, would Strada radiators work on this type of system?
I have Jaga DBE fitted in my house. Is there a manual that shows how to take the cover off or any instructions should I need to get any objects that have fallen inside.
our system goes through a 4-storey house from the basement. When it starts up there is a lot of noise - I think from gas/air in the pipes. Sometimes this triggers a hammer effect in the radiator thermostat valves which then make a loud buzzing noise.
There is one air release...
Hi, I'm looking for any jaga improved installers around the Glasgow area for a small domestic installation? this would involve an element of design as well to get the heat calcs correct.
I'm considering Strada radiators in the near future - what is your opinion on radiator shelves?
I use them at present to good effect with steel panel rads [approx 300mm deep].
I am considering installing Strada radiators under our windows as we need all the wall space in our rooms. The windows are brand new and very efficient in keeping the heat in. We would also like the option of long curtains.
Am I correct in thinking that:
1. The casing of the...
I have Jaga linea radiators and they do not give out much heat; how can I make them work so that they heat my house?
Where can I order Knockonwood radiators (in Surrey)?
I have 3 x Iguana Radiators, best radiators ever. However, they have all begun leaking from the lockshield screw. I've been able to stop 2 of them from leaking by messing around with the adjustment (a slight movement in either direction starts them leaking again). The 3rd one is chronic...
My Jaga Moon is not getting hot on the top. How do I vent the air from it?
Does your radiator
Jaga DBE mini freestanding radiator come in these measures?
(Length x Depth x Height) 200 x 23 x 23 cm
(Length x Depth x Height) 70 x 23 x 23 cm
These are measures without Feet (12,5 cm?)
I'm truly enjoying the design and layout of your site. It's a very effortless on the eyes which makes it a lot more pleasant for me to come here and pay a visit to more often. Did you hire out a designer to create your theme? Superb work!
Where can I obtain prices for Strada spare parts ? I live in Scotland and my post code is
Please can I have correction factors for radiators working on 45 deg flow.
The rad is not getting hot! I want to bleed it but can't see how. Can you help?
Are the Iguana radiators suitable for use with ground source heating? Thanks
Hi, is it possible to obtain two Jaga Iguana decorators caps as my heating engineer didn't keep them when he installed the two radiators I have in my dining room. The white caps in the picture.
I need two.
I want to put a radiator in a corner of the kitchen. The circo corner looks ideal, but was hoping for something slightly smaller, say the size of the flat wall circo 1800 x 270. Do you do a bracket that would fit this in the corner? eg a bracket...
I was wondering where the name Jaga comes from? It is very unusual. I know the company is from Belgium, is it something to do with that?
Im correctlry decorating a house and was wondering is somebody could assist me with preparing for a strada.
1. When taking a radiator size, say 1200 by 500, Is there any way I know where to bring the pipes out of the wall (without having the radiator first), so they...
Hi, I am looking for an LST radiator, could you advise me on which one is best for a child's bedroom? Thank you.
Where can I find the output tables for all your trench products which heat and cool?
when first installed and bled only half the rad heated, now dosnt heat at all Can you advise on what I need to do to resolve.
Hi guys, we have a Jaga Circo that gets hot at the top & bottom but is cool on the centre. Any ideas as to what may be the problem? Thanks, Pete, Dundee
I have Jaga Iguana Arco radiator (vertical) that is fitted with a Jaga Iguana Angled Wall Mounted Decorative Thermostatic Radiator Valve Connector - Does this valve have a setting on the back for switching between one pipe or two pipe operation? The only reason I ask is that one half...
It has now stopped getting warm. Part of gas central heating system. Have bled and re ballanced whole system, but while entry pipe gets warm radiator doesn't. can you advise please?