0 replies
    1560 views

    1 replies
    5462 views

    Smell coming from recently fitted radiator

    I have recently had a Geo thermal radiator fitted by a professional plumber and a smell has started to come off it (within 24hrs) any help as to what can be happening would be greatly appreciated.

    23/01/2011
    GJL

    1 replies
    5237 views

    hi I am installling a g source heat pump and need advice on rads verses under floor heating

    advice please on rads or under floor heating most efficiant to heat with goun source heat pump

    13/01/2011
    christine

    0 replies
    5025 views

    Tempo surface temperature

    Do your Tempo LST radiators comply with BS8300 surface temperature of 41 deg C?

    14/01/2011
    john@neptunebs.co.uk

    3 replies
    5400 views

    Isolating an Iguana angled valve

    I have a Jaga Iguana Aplano radiator with the Iguana Angled Wall Mounted Valve, fitted in 2008. I don't know if the valve is fitted in two pipe or monotube mode and I can't get a view behind it to find out.

    I now have a leak from one...

    09/01/2011
    I_Thompson

    2 replies
    5085 views

    Taboe-Sani with electric element heating at the bottom but not at the top

    Have a Taboe-Sani radiator with electric element which is heating at the bottom but not the top, guessing this is due to not enough water in the radiator, can this just be topped up? What is the correct procedure? Thanks

    04/01/2011
    Huck

    2 replies
    5523 views

    Strada low heat output

    I have 2 strada radiators and the heat output seems to be very low. They are both quite large (about 15cm deep, 1.1m wide, 60cm high). Placing your hand above the radiator feels like a very gentle warmth - less than a toaster. What can I check? I already unscrewed...

    04/01/2011
    Jarmes

    1 replies
    6771 views

    Jaga Iguana angled wall mounted decorative Thermostatic radiator valve connection set Chrome effect

    I purchased a Jaga Iguana angled wall mounted decorative Thermostatic radiator valve connection set Chrome effect from B&Q a while ago. It has been stored for some time and now I want to fit it I realise it does not have a Thermostatic head supplied. I have contacted B&Q about...

    04/01/2011
    Gerry

    1 replies
    5166 views

    radiators are not working on the ground floor but are on on full on the upper two floors.

    JAGA radiators are completely cold on the ground floor (despite the thermostat being on full) yet the same radiators connected to the same DRAYTON LP722 controller and OSO Indirect 210 Boiler, are all working on the upper floors. I am not a plumber just trying to solve for myself....

    04/01/2011
    propinquity

    0 replies
    2147 views

    how do I bleed a jaga iguana corner radiator please?

    we are listening to the sound like a waterfall and assume there is air in the radiator. we hope you can help.We are not sure what tool to use to bleed the radiator, and due to its' height it's difficult to see what we should be doing.

    28/12/2010
    evahowe

    1 replies
    1794 views

    Strada

    do you have any strada radiators in stock in the UK

    20/12/2010
    janet

    1 replies
    1806 views

    Jan

    I'm installing a GSHP and want to know what radiators are suitable and how to calculate sizes for bedrooms and bathrooms. many thanks

    09/12/2010
    jan williams

    1 replies
    2403 views

    Where can I use a Strada radiator?

    Can I use a Strada Jaga radiator in an ordinary household heating system? (ie non heatpump - just the normal circulation of hot water heated by a boiler)

    02/12/2010
    dalla

    1 replies
    4503 views

    Iguana Arco radiator valves

    I have a Jaga Iguana Arco 410m wide radiator on order. Can you please tell me if the connections at the bottom are half or three-quarter inch. Do you supply or can you recommend suitable radiator valves for this radiator. I would prefer them in white or cream Thanks,...

    25/11/2010
    anthonyhugh.thompson@btinternet.com

    1 replies
    2511 views

    Iguana Circo radiator wall mounting brackets.

    Dear Jaga, I've acquired an (unused) Iguana Circo radiator from a clearance warehouse but it has come without the wall mounting brackets. I'd like to purchase a set of these - could you please advise how I could do this and how much they would cost.
    Cheers,
    Steve.

    24/11/2010
    caperock

    1 replies
    1851 views

    how to remove the grill

    How is the front cover and grill removed?

    23/11/2010
    Buzby

    1 replies
    1956 views

    aplano bleed valve

    hi I have the aplano and would like to put the alladdin auto bleed valve what one would i need and do i need two
    thanks col

    23/11/2010
    colw113

    1 replies
    3669 views

    How do I bleed a Jaga radiator please?

    I am very pleased with my Jaga Strada radiators but have one that just isn't coming up to heat. I think it needs bleeding but I don't know how to do it.

    Thank you

    21/11/2010
    kanga

    1 replies
    1855 views

    Iguana Cico Valve Set?

    Where can I purchase the valve set for the iguana circo radiator I've just purchased? (5094.425 and 5090.1111) Thanks

    18/11/2010
    harvard1973

    1 replies
    2067 views

    corner circo

    corner link bar required for iguana circo corner radiator but where to obtain?

    16/11/2010
    Mandyjay

    1 replies
    2227 views

    where to buy double rad valves

    i have purchased 1 of your radiators and need to buy 5094.427 and 5090.1111 could you let me know where i can get them, or can i get them through you...thanks

    08/11/2010
    gilb1964

    1 replies
    2193 views

    Clima Canal Prices

    I'm looking for the price of Clima Canal units for a range of rooms in my house the largest will need a heating ouput of 1100W and the smallest 600W powered by a standard boiler. Alternatively is there a price list available?
    Thanks,
    John Earley

    03/11/2010
    jaae01

    1 replies
    1978 views

    fitting instructions

    hi where can i find fitting instructions for the Strada

    19/10/2010
    carol

    3 replies
    3347 views

    IGUANA CIRCO DESIGNER RADIATOR VALVE SETS

    Dear Jaga, Help!! I am a huge fan of your radiators and am gradually swopping all my old rads to your Iguana design rads. I have however hit a huge snag with my 2 most recent Iguana Arco and Circo, I purchased them both along with the designer radiator valve...

    26/10/2010
    ampaliok

    1 replies
    1860 views

    High-level valves for Strada

    Are high-level valves available for the Strada?

    29/10/2010
    Sarah

    1 replies
    1952 views

    Where can I purchase JAGA radiators in the Greater Manchester area as a retail customer for a domestic refurbishment

    I would like to purchase some Jaga radiators. Are there any retail outlets in the Greater Manchester area. Thanks. Michael

    27/10/2010
    michaelsheldon

    1 replies
    1785 views

    I have a Strada and the top grill will not sit correctly.

    I have a Strada radiator and the top grill will not sit correctly. I have tried all methods and it will not click in. We have 10 more radiators in the house of the same type and they all fit ok.
    The model number is STRW 03510010.

    24/10/2010
    iandawson

    2 replies
    3291 views

    price for radiators

    I am interested in having some radiators by you.
    Just so I can compare against standard rads please give me a price example
    please give me an idea for a radiator siize 60 widex20 deep x15depth
    thank you.
    Mary Coughlan

    21/10/2010
    mary coughlan

    1 replies
    1961 views

    how do I bleed the Cocoon LST

    The radiator is banging when it first comes on so i want to try and bleed it but I cannot find a bleed screw

    21/10/2010
    jaykay301

    0 replies
    1637 views

    How do I remove the casing of a Strada radiator?

    My daughter has dropped some rubbish into the grill of the radiator and I want to clear it before turning the heating on again for the winter!!

    18/10/2010
    fenemores