The Jaga Forum is the perfect place to find the answers you need. From specific Jaga product queries to general heating and ventilation problems, we can help. The Forum is also a great way to discuss wider industry topics with other heating professionals.
How to get started
To post a question, simply click here and then select ‘Register’ to open your free Forum account. Registration only takes a few moments, but will give you the chance to put your questions to our team of heating and ventilation experts. Once your details have been submitted, you will receive an email confirming your forum membership. Follow the instructions in the email and you will then be able to post messages and questions on the Jaga Forum.
Please note that this forum is moderated, so messages may not appear immediately.
the thermostat controls of the radiators are locked can you please advise on how to unlocked them so that heating can be lowered
Hi I have a Ciro Corner Rad and it fails to heat properly. It gets hot at the tepid at the top and cold at the bottom, do you have any advice
Hi.I am looking at either a Basic, Strada or linea DBE radiator. I'm looking for one that can give approx 2KW in 'comfort' mode. Can you provide a quote for the cheapest option to do this please? Thanks Paul
Wher can i purchase iguana circo straight designer radiator valves
with your low flow radiators can I just replace the radiators I have or do I need to put in a new system as we use a combi boiler
How much do these rads cost. i have no heating in house and would like to install a air heat scource pump and 6 rads
It was fitted in 1999 and worked perfectly until last September, but it then developed a leak. My local plumber thought it was due to the valve, so he replaced the TRV. No problem for a couple of months. But now the leak has come back. He now thinks the...
Do you have any tech info on improved room temperature distribution with lower temp radiators compared with traditional high temperature, with or without fan-assist?
can strada radiators be supplied in any RAL colour?
how do i bleed the cocoon lst
What is the correct way to bleed the Iguana Arco rad? What type of valves should be fitted, can they be seperate or do they have to be double as shown in your photos?
Are there any special recommendations when installing a Jaga Iguana Arco vertical radiator as opposed to a conventional radiator? I have had two fitted with Jaga Iguana Angled Wall Mounted Decorative Thermostatic Radiator Valve Connectors and both are taking a long time to heat up and I feel never really...
We have been waiting for a Jaga 5090.1104 thermostatic head for approximately 3 weeks. Would you know the average waiting time?
See belwo from FAQ - can someone tell me how to do it ?
Can I remove and refit my radiators as I am redecorating?
Unlike most traditional radiators, the Jaga casing can be removed without any draining down at all. We recommend the heat exchanger is covered so that paint, plaster...
how do i bleed a strada radiator ? do i need to remove the casing ? if so how do i remove the casing ? do i need to first remove the thermostatic valve ? if so do i need a plumber !!
I have specified Basic DBE radiators on a job of mine. I have had a query regarding the panels surface temperature. I will have a flow temperature of 50oC and a return of 40oC, could you tell be the radiators surface temperature whilst in static mode i.e without fans running?...
I would like to get advise on how the Jaga Pro two pipe radiator valves can be adjusted to balance the radiators.
Good morning, I am looking to install some of your Strada DBE in my new build house and just wondered what the 'dead zone' of the TRVs / TRV heads is.
would you be able to advise please?
Can radiators be used with air source heat pumps at low temperatures such as 35C?
If so, what will the COP be reduced by, if at all?
Thanks in advance.
How do I turn on the DBE system on my rads? We installed a GSHP in Aug (previously had a gas boiler) so this is the first time we're wanting to use the boost/comfort etc. functions. There's no blue light showing on the control panels at all. Holding the button...
Hi, Please can you advise the other components and specifications required for fitting a Jaga Sani Basic towel radiator? i.e. heating element....
Do I need to bleed my Jaga Linear Plus radiators? They are approximately 4 years old and we have not bled them before. However, we are aware of water 'gurgling' noise which we have not experienced in previous winters. Many thanks, r
I bought a geo horizontal in black. There are two small chips in the corners. What do you recommend to fill the gaps and make a repair?
Do the radiator valves have to be adjusted/balanced to optimise performance?
how do I bleed my rad
can anyone advise me about fitting geo horizontal rads do you need to fit the flow to the t.r.v. side and if you don't what will it do. The new geo is not allowing the water through so hence wont heat up
What is the air flow (CFM) capability of the Clima Canal fans? How much are do they circulate at full speed?
Hi, I have purchased a jaga iguana chrome angled valve set to go with my jaga Iguana radiator, but haven't got the coupling connection set to go with the valve to fit pipes. B & Q where i got my radiator have said up to 3 to 4 weeks for...
what is low temperature ? Will the radiators work with 35 degrees c water?
I have recently purchased an Iguana Circo Corner from B&Q. The fitting instructions show the connections at the bottom however your catalogue show that this product is available with connections at the top. Can I mount this radiator upside down as my pipework is coming from above.