The Jaga Forum is the perfect place to find the answers you need. From specific Jaga product queries to general heating and ventilation problems, we can help. The Forum is also a great way to discuss wider industry topics with other heating professionals.
How to get started
To post a question, simply click here and then select ‘Register’ to open your free Forum account. Registration only takes a few moments, but will give you the chance to put your questions to our team of heating and ventilation experts. Once your details have been submitted, you will receive an email confirming your forum membership. Follow the instructions in the email and you will then be able to post messages and questions on the Jaga Forum.
Please note that this forum is moderated, so messages may not appear immediately.
I am considering adding a window seat to a feature window. I'd like this to have some heating so supplement the temperature comfort on the landing. Would a small trench heater built into the floor under the bench be one solution. The bench could be designed to allow airflow. Or...
I have received a number of Strada units, one is different in as much as it has a, what looks like, a automatic air vent valve, its black, circular, and fits where the other "vents on a stick" screws into. Is it a auto vent or something else?
How do you bleed a DBE Strada radiator?
I rent an appartment with Jaga Linea installed in the bedroom. I have the impression that it does not provide much heat, although I turned the valve to HOT (highest position possible). From my minimal experience with radiators, I think that bleeding the air from inside would help. However,...
Hi can anybody tell me if the Jaga type 6 valves are bi-directional pls.
I've had three knockonwood 10 radiators installed for several years. I've just noticed the flow /returns are reversed on all three. How much will this effect the performance?
Can you please assist? Tempo Provalve purchased on 08/09/2000 leaking at valve pin, is there a service kit for this valve, or must I replace the valve with a set12 valve body?
Can the Jaga pro valve be serviced.
Is there a service kit?
Can the head work (brass spindle & valve be removed from the body and replaced?
Hello, we bought this radiator a couple of years ago at B&Q when we were buying a new house. We have only just got to fitting it, but cannot find any information on what model it is (think it looks like an Arco), and where the bleed valve would be....
My two radiators are hot at top but cold at bottom. I've tried bleeding them and all seems fine. I wondered whether it was something to do with the lockshield. Should that be open or closed when the heating is running?
Hi, I've recently had a full ASHP system installed by a manufacturer approved supplier. I specified Jaga Strada DBE rads and sized them to run with a 35°C flow temp. The return delta is 5°C.
Now the system is installed, it works well in heating the home but the water flow...
I have identified that we have Linea Plus radiators upstairs, two with DBE and two without. The radiator in the small bedroom is cold, even though that in the large bedroom is purring away, showing the "comfort" light. The fans in the small bedroom radiator are never on and I...
Is it possible to buy play radiators in different greens? I'm working on a garden room for a nursery.
Where would I be able to buy your Strada radiators and how do I know what sizes I should replace them with?
I have just moved into a house with jaga knockonwood radiators. They don't seem to be very hot and the house isn't heating up. Do they need venting?
I have a jaga play radiator in my daughters bedroom. It was installed a few months ago and the required wattage was provided by a mechanical and electrical engineer.
The radiator has never given off much heat and has never heated the room to above 16 Celsius. The room...
Can i customise colours for the Play radiator or is it only available in the 5 colours shown on the website?
I HAVE SEEN JAGA RADIATORS NAMED DECO SPACE AND FLAUTO AND I NEED THE TECHNICAL INDICATIONS AND AN IMAGE. AND ALSO TOWEL RAILS NAMED IRSAP. I CANNOT FIND THEM ON YOUR SITE
Does anyone know where in the UK or online I can obtain the rubber sleeve which fits the 15mm split olive and copper pipe. I've searched everywhere I can find a supplier. Your help is appreciated. Thank you
Is there anything on the Briza such as a sensor so the fans switch off when the heating system is off?
If so, how long will it take?
Which type of your radiators should be used with Ground Source, Air Source and Water Source Heat Pump Systems?
Is there the option to have the play radiator in yellow? Thanks
Several of our Play radiators are not warming up at all. They all have DBE fitted and the lights indicate low water temperature. However the boiler tells me that the water temperature is at 75 degrees and the inlet pipes on all the radiators is hot. A...
Its been in an attic room for 2 years right at the top of the house, and isn't getting very warm when required, so I suspect it needs bleeding. I cannot locate the technical info that came with it.
Hi, I have bought the Iguana Vertical Radiators and the iguana straight floor valves. I have just plumbed them in but the radiators are not getting hot. At the moment hot water is flowing through the pipes and valves but the radiators are not getting hot.
Please can you confirm the...
I am having an air source heating system fitted and need to know which radiator range will give the highest heat output for a given size.
I have several Jaga Strada DBEs installed in my house. My question relates to the function of the boost buttons. There are three lights on the boost button (on/off, comfort and boost). One click switches the on/off light on, a further click switches both the comfort and boost lights on...
In what situations would you recommend using the Tempo Continuous casing and not the Tempo or the Tempo Freestanding radiators please? What are its advantages?
I have found a leak coming from between the hexagonal shaped nut on the bleeder vent and the top surface of the radiator. After turning off both radiator valves and releasing the pressure, I tried to remove the bleeder fitting but I found it just turns without unscrewing. can the...